Private 5G and its Suitability for Industrial Networking

5G was and is still surrounded by many promises and buzzwords, such as the famous 1 ms, real-time, and Ultra-Reliable and Low-Latency Communications (URLLC). This was partly intended to get the attention of vertical industries to become new customers for mobile networks, which shall be deployed in their factories. With the allowance of federal agencies, companies deployed their own private 5G networks to test new use cases enabled by 5G. But what has been missing, apart from all the marketing, is the knowledge of what 5G can really do? Private 5G networks are envisioned to enable new use cases with strict latency requirements, such as robot control. This work has examined in great detail the capabilities of the current 5G Release 15 as private network, and in particular its suitability with regard to time-critical communications. For that, a testbed was designed to measure One-Way Delays (OWDs) and Round-Trip Times (RTTs) with high accuracy. The measurements were conducted in 5G Non-Standalone (NSA) and Standalone (SA) net-works and are the first published results. The evaluation revealed results that were not obvious or identified by previous work. For example, a strong impact of the packet rate on the resulting OWD and RTT was found. It was also found that typically 95% of the SA downlink end-to-end packet delays are in the range of 4 ms to 10 ms, indicating a fairly wide spread of packet delays, with the Inter-Packet Delay Variation (IPDV) between consecutive packets distributed in the millisecond range. Surprisingly, it also seems to matter for the RTT from which direction, i.e. Downlink (DL) or Uplink (UL), a round-trip communication was initiated. Another important factor plays especially the Inter-Arrival Time (IAT) of packets on the RTT distribution. These examples from the results found demonstrate the need to critically examine 5G and any successors in terms of their real-time capabilities. In addition to the end-to-end OWD and RTT, the delays caused by 4G and 5G Core processing has been investigated as well. Current state-of-the-art 4G and 5G Core implementations exhibit long-tailed delay distributions. To overcome such limitations, modern packet processing have been evaluated in terms of their respective tail-latency. The hardware-based solution was able to process packets with deterministic delay, but the software-based solutions also achieved soft real-time results. These results allow the selection of the right technology for use cases depending on their tail-latency requirements. In summary, many insights into the suitability of 5G for time-critical communications were gained from the study of the current 5G Release 15. The measurement framework, analysis methods, and results will inform the further development and refinement of private 5G campus networks for industrial use cases

Private 5G and its Suitability for Industrial Networking

5G was and is still surrounded by many promises and buzzwords, such as the famous 1 ms, real-time, and Ultra-Reliable and Low-Latency Communications (URLLC). This was partly intended to get the attention of vertical industries to become new customers for mobile networks, which shall be deployed in their factories. With the allowance of federal agencies, companies deployed their own private 5G networks to test new use cases enabled by 5G. But what has been missing, apart from all the marketing, is the knowledge of what 5G can really do? Private 5G networks are envisioned to enable new use cases with strict latency requirements, such as robot control. This work has examined in great detail the capabilities of the current 5G Release 15 as private network, and in particular its suitability with regard to time-critical communications. For that, a testbed was designed to measure One-Way Delays (OWDs) and Round-Trip Times (RTTs) with high accuracy. The measurements were conducted in 5G Non-Standalone (NSA) and Standalone (SA) net-works and are the first published results. The evaluation revealed results that were not obvious or identified by previous work. For example, a strong impact of the packet rate on the resulting OWD and RTT was found. It was also found that typically 95% of the SA downlink end-to-end packet delays are in the range of 4 ms to 10 ms, indicating a fairly wide spread of packet delays, with the Inter-Packet Delay Variation (IPDV) between consecutive packets distributed in the millisecond range. Surprisingly, it also seems to matter for the RTT from which direction, i.e. Downlink (DL) or Uplink (UL), a round-trip communication was initiated. Another important factor plays especially the Inter-Arrival Time (IAT) of packets on the RTT distribution. These examples from the results found demonstrate the need to critically examine 5G and any successors in terms of their real-time capabilities. In addition to the end-to-end OWD and RTT, the delays caused by 4G and 5G Core processing has been investigated as well. Current state-of-the-art 4G and 5G Core implementations exhibit long-tailed delay distributions. To overcome such limitations, modern packet processing have been evaluated in terms of their respective tail-latency. The hardware-based solution was able to process packets with deterministic delay, but the software-based solutions also achieved soft real-time results. These results allow the selection of the right technology for use cases depending on their tail-latency requirements. In summary, many insights into the suitability of 5G for time-critical communications were gained from the study of the current 5G Release 15. The measurement framework, analysis methods, and results will inform the further development and refinement of private 5G campus networks for industrial use cases

Private 5G and its Suitability for Industrial Networking

5G was and is still surrounded by many promises and buzzwords, such as the famous 1 ms, real-time, and Ultra-Reliable and Low-Latency Communications (URLLC). This was partly intended to get the attention of vertical industries to become new customers for mobile networks, which shall be deployed in their factories. With the allowance of federal agencies, companies deployed their own private 5G networks to test new use cases enabled by 5G. But what has been missing, apart from all the marketing, is the knowledge of what 5G can really do? Private 5G networks are envisioned to enable new use cases with strict latency requirements, such as robot control. This work has examined in great detail the capabilities of the current 5G Release 15 as private network, and in particular its suitability with regard to time-critical communications. For that, a testbed was designed to measure One-Way Delays (OWDs) and Round-Trip Times (RTTs) with high accuracy. The measurements were conducted in 5G Non-Standalone (NSA) and Standalone (SA) net-works and are the first published results. The evaluation revealed results that were not obvious or identified by previous work. For example, a strong impact of the packet rate on the resulting OWD and RTT was found. It was also found that typically 95% of the SA downlink end-to-end packet delays are in the range of 4 ms to 10 ms, indicating a fairly wide spread of packet delays, with the Inter-Packet Delay Variation (IPDV) between consecutive packets distributed in the millisecond range. Surprisingly, it also seems to matter for the RTT from which direction, i.e. Downlink (DL) or Uplink (UL), a round-trip communication was initiated. Another important factor plays especially the Inter-Arrival Time (IAT) of packets on the RTT distribution. These examples from the results found demonstrate the need to critically examine 5G and any successors in terms of their real-time capabilities. In addition to the end-to-end OWD and RTT, the delays caused by 4G and 5G Core processing has been investigated as well. Current state-of-the-art 4G and 5G Core implementations exhibit long-tailed delay distributions. To overcome such limitations, modern packet processing have been evaluated in terms of their respective tail-latency. The hardware-based solution was able to process packets with deterministic delay, but the software-based solutions also achieved soft real-time results. These results allow the selection of the right technology for use cases depending on their tail-latency requirements. In summary, many insights into the suitability of 5G for time-critical communications were gained from the study of the current 5G Release 15. The measurement framework, analysis methods, and results will inform the further development and refinement of private 5G campus networks for industrial use cases

Healing Hands: The Tactile Internet in Future Tele-Healthcare

In the early 2020s, the coronavirus pandemic brought the notion of remotely connected care to the general population across the globe. Oftentimes, the timely provisioning of access to and the implementation of affordable care are drivers behind tele-healthcare initiatives. Tele-healthcare has already garnered significant momentum in research and implementations in the years preceding the worldwide challenge of 2020, supported by the emerging capabilities of communication networks. The Tactile Internet (TI) with human-in-the-loop is one of those developments, leading to the democratization of skills and expertise that will significantly impact the long-term developments of the provisioning of care. However, significant challenges remain that require today’s communication networks to adapt to support the ultra-low latency required. The resulting latency challenge necessitates trans-disciplinary research efforts combining psychophysiological as well as technological solutions to achieve one millisecond and below round-trip times. The objective of this paper is to provide an overview of the benefits enabled by solving this network latency reduction challenge by employing state-of-the-art Time-Sensitive Networking (TSN) devices in a testbed, realizing the service differentiation required for the multi-modal human-machine interface. With completely new types of services and use cases resulting from the TI, we describe the potential impacts on remote surgery and remote rehabilitation as examples, with a focus on the future of tele-healthcare in rural settings